M Performance Carbon Rear Diffuser Retrofit Kit. M Performance Carbon Rear Spoiler Retrofit Kit (Paintable / Non-Paintable) BMW 6 Series Coupé/Gran Coupé (F13/F13M/F06/F06M). M Performance carbon rear diffuser retrofit kit BMW 6 Series Coupé/Gran Coupé/Convertible (F13M/F06M/F12M)

EBA – 01 29 2 349 506
Original BMW Accessories
BMW Installation Instructions

Retrofit kit number

Number Component designation Type Installation time (h)
51 62 2 327 610 M Performance carbon rear spoiler retrofit kit (paintable) F13/F13M/F06/F06M 0.75
51 62 2 405 506 M Performance carbon rear spoiler retrofit kit (non-paintable) F13/F13M/F06/F06M 0.75
51 19 2 347 848 M Performance carbon rear diffuser retrofit kit F13M/F06M/F12M 0.25

Installation time

Installation time see table. This may vary depending on the condition of the vehicle and the equipment in it.

The installation time shown does not include any time spent on programming/coding.

The calculation of the total costs for the programming time must be factored into the calculation of retrofitting costs (no invoicing via warranty).

Important information

These installation instructions are primarily designed for use within the BMW dealership organisation and by authorised BMW service companies.

These installation instructions are intended for use by qualified specialist staff trained on BMW vehicles with the relevant expert knowledge.

All work must be completed using the latest BMW repair manuals, wiring diagrams, servicing manuals and work instructions, in a rational order, using the prescribed tools (special tools) and observing current health and safety regulations.

If you experience installation or function problems, restrict troubleshooting to approx. 0.5 hours for mechanical work and 1.0 hour for electrical work.

To avoid unnecessary extra work and/or costs, send an inquiry straight away to the technical parts support team via the Aftersales Assistance Portal (ASAP).

Quote the following information:

  • Chassis number,
  • Retrofit kit part number,
  • A detailed description of the problem, – Any work already carried out.

Do not archive the hard copy of these installation instructions since daily updates are provided via ASAP.

Installation information

  • All contact/bonding surfaces on the components being installed must be absolutely dry, clean, and free of wax, silicon and grease. These surfaces must be treated with suitable BMW cleaner of BMW primer (see EPC for details), as set out in the appropriate product application instructions
  • If you use adhesive tape, it must be applied using a contact pressure of between 10 N/cm2 and 50 N/cm2
  • Take care not to damage the parts when opening the packaging
  • Check that all the parts fit accurately on the car before fitting them
  • All affected components and their bonding surfaces must be at room temperature for installation. The ideal relative humidity is 50%. Different values will change the specified times
  • After completing the gluing And installation work, the car must remain stationary at room temperature for at least 12 hours
  • If adhesives are used the car may be driven after 24 hours, and may be taken through a car wash after

48 hours. The car must not be driven above a speed of vmax 100 km/h for 24-48 hours

  • The installed parts may become loose and fly off the car if you fail to wait for the full reaction time of the primer/adhesive. Danger of accidents.
  • Some of the installation steps are shown only on one side of the car. Proceed in the same way on the other side of the car
  • All pictures show LHD cars; proceed accordingly on RHD cars

If an M Performance rear spoiler is to be installed, any rear spoiler already in place must be removed/dismantled as per ISTA.

Painting instructions (for the carbon rear spoiler retrofit kit only)

Check that all the parts fit accurately on the car before painting them. Primed parts must be pre-treated accordingly before painting.

To ensure correct painting, the EBA must be provided to the painter.

The BMW painting instructions must be observed (see ISTA No. 99 00 …).

Ordering instructions

The materials such as liquid adhesive, cleaner and activators are assigned to the relevant products in the EPC (see EPC for instructions and part numbers). If the EPC does not explicitly specify the materials, always use cleaner, adhesive and activator from the BMW product range.

Special tools required

None

Installation instructions for the carbon rear spoiler retrofit kit only

No adjustments need to be made to the tail gate’s tension spring.

Table of contents

Section

1. M Performance carbon rear spoiler (part number 51 62 2 327 610) parts list
2. M Performance carbon rear spoiler (part number 51 62 2 405 506) parts list
3. M Performance carbon rear diffuser (part number 51 62 2 347 848) parts list
4. Preparatory work
5. Prepare the M Performance carbon rear spoiler (part number 51 62 2 327 610) for painting
6. Install the M Performance carbon rear spoiler (part number 51 62 2 327 610)
7. Install the M Performance carbon rear spoiler (part number 51 62 2 405 506)
8. Install the M Performance carbon rear diffuser (part number 51 62 2 347 848)
9. Concluding work and coding

1. M Performance carbon rear spoiler (part number 51 62 2 327 610) parts list

M Performance Carbon Rear Diffuser Retrofit Kit.  M Performance Carbon Rear Spoiler Retrofit Kit (Paintable / Non-Paintable) BMW 6 Series Coupé/Gran Coupé (F13/F13M/F06/F06M). M Performance carbon rear diffuser retrofit kit BMW 6 Series Coupé/Gran Coupé/Convertible (F13M/F06M/F12M)

Legend

AA Carbon rear spoiler (1 x)
AB Liquid adhesive (not included in kit, see EPC for details)
AC Cleaner (not included in kit, see EPC for details)

2. M Performance carbon rear spoiler (part number 51 62 2 405 506) parts list

M Performance Carbon Rear Diffuser Retrofit Kit.  M Performance Carbon Rear Spoiler Retrofit Kit (Paintable / Non-Paintable) BMW 6 Series Coupé/Gran Coupé (F13/F13M/F06/F06M). M Performance carbon rear diffuser retrofit kit BMW 6 Series Coupé/Gran Coupé/Convertible (F13M/F06M/F12M)

Legend

BA Carbon rear spoiler (1 x)
BB Liquid adhesive (not included in kit, see EPC for details)
BC Cleaner (not included in kit, see EPC for details)

3. M Performance carbon rear diffuser (part number 51 62 2 347 848) parts list

M Performance Carbon Rear Diffuser Retrofit Kit.  M Performance Carbon Rear Spoiler Retrofit Kit (Paintable / Non-Paintable) BMW 6 Series Coupé/Gran Coupé (F13/F13M/F06/F06M). M Performance carbon rear diffuser retrofit kit BMW 6 Series Coupé/Gran Coupé/Convertible (F13M/F06M/F12M)

Legend

CA Carbon rear diffuser (1 piece)

4. Preparatory work

The following components must be removed first of all ISTA No.
None

5. Prepare the M Performance carbon rear spoiler (part number 51 62 2 327 610) for painting

M Performance Carbon Rear Diffuser Retrofit Kit.  M Performance Carbon Rear Spoiler Retrofit Kit (Paintable / Non-Paintable) BMW 6 Series Coupé/Gran Coupé (F13/F13M/F06/F06M). M Performance carbon rear diffuser retrofit kit BMW 6 Series Coupé/Gran Coupé/Convertible (F13M/F06M/F12M)

Carbon rear spoiler AA can be installed immediately or may be painted according to the customer’s wishes

The carbon rear spoiler AA can be partially painted in accordance with the customer’s wishes.

Refer to the painting instructions on page 2. Before painting, mask the areas of carbon rear spoiler AA that are not to be painted using the masking tape and the painting gap provided (1).

6. Install the M Performance carbon rear spoiler (part number 51 62 2 327 610)

M Performance Carbon Rear Diffuser Retrofit Kit.  M Performance Carbon Rear Spoiler Retrofit Kit (Paintable / Non-Paintable) BMW 6 Series Coupé/Gran Coupé (F13/F13M/F06/F06M). M Performance carbon rear diffuser retrofit kit BMW 6 Series Coupé/Gran Coupé/Convertible (F13M/F06M/F12M)

The areas being bonded must be completely dry, clean and free from wax or grease.

Clean the bonding surface (1) on the car with cleaner AC.

M Performance Carbon Rear Diffuser Retrofit Kit.  M Performance Carbon Rear Spoiler Retrofit Kit (Paintable / Non-Paintable) BMW 6 Series Coupé/Gran Coupé (F13/F13M/F06/F06M). M Performance carbon rear diffuser retrofit kit BMW 6 Series Coupé/Gran Coupé/Convertible (F13M/F06M/F12M)

Pull back the ends of the adhesive backing film (2) and (3) on the carbon rear spoiler AA A far enough so that small tabs form. Sand the areas (4) using a suitable agent, clean with cleaner AC and then apply liquid adhesive AB as shown in the areas (4).

M Performance Carbon Rear Diffuser Retrofit Kit.  M Performance Carbon Rear Spoiler Retrofit Kit (Paintable / Non-Paintable) BMW 6 Series Coupé/Gran Coupé (F13/F13M/F06/F06M). M Performance carbon rear diffuser retrofit kit BMW 6 Series Coupé/Gran Coupé/Convertible (F13M/F06M/F12M)

Ensure that all tabs (2) and (3) are visible.

Place carbon rear spoiler AA on the edge (5) of the boot lid and centre it. Gradually remove the adhesive backing film (3) from the centre outwards. Then pull the adhesive films (2) from the inside outwards. Press rear spoiler AA firmly and repeatedly onto the boot lid.

No adjustments need to be made to the boot lid’s tension spring.

Remove any excess liquid adhesive immediately.

Note the painting instructions on page 2.

7. Install the M Performance carbon rear spoiler (part number 51 62 2 405 506)

M Performance Carbon Rear Diffuser Retrofit Kit.  M Performance Carbon Rear Spoiler Retrofit Kit (Paintable / Non-Paintable) BMW 6 Series Coupé/Gran Coupé (F13/F13M/F06/F06M). M Performance carbon rear diffuser retrofit kit BMW 6 Series Coupé/Gran Coupé/Convertible (F13M/F06M/F12M)

The areas being bonded must be completely dry, clean and free from wax or grease.

Clean the bonding surface (1) on the car with cleaner BC.

M Performance Carbon Rear Diffuser Retrofit Kit.  M Performance Carbon Rear Spoiler Retrofit Kit (Paintable / Non-Paintable) BMW 6 Series Coupé/Gran Coupé (F13/F13M/F06/F06M). M Performance carbon rear diffuser retrofit kit BMW 6 Series Coupé/Gran Coupé/Convertible (F13M/F06M/F12M)

Place the carbon rear spoiler BA on the boot lid, centre it and mark the position (2) at the left and right using a suitable tool.

M Performance Carbon Rear Diffuser Retrofit Kit.  M Performance Carbon Rear Spoiler Retrofit Kit (Paintable / Non-Paintable) BMW 6 Series Coupé/Gran Coupé (F13/F13M/F06/F06M). M Performance carbon rear diffuser retrofit kit BMW 6 Series Coupé/Gran Coupé/Convertible (F13M/F06M/F12M)

Sand and clean the edge area (3) on the rear spoiler BA and leave it to dry. Apply liquid adhesive BB in the form of a bead with a diameter of 3 mm in the edge area (3).

M Performance Carbon Rear Diffuser Retrofit Kit.  M Performance Carbon Rear Spoiler Retrofit Kit (Paintable / Non-Paintable) BMW 6 Series Coupé/Gran Coupé (F13/F13M/F06/F06M). M Performance carbon rear diffuser retrofit kit BMW 6 Series Coupé/Gran Coupé/Convertible (F13M/F06M/F12M)

Centre the carbon rear spoiler BA between the marks (2) and press it into position. First secure the outer adhesive tape (3) and then the inner adhesive tape (4). Press carbon rear spoiler BA firmly onto the boot lid.

Remove any excess liquid adhesive immediately.

Note the painting instructions on page 2.

8. Install the M Performance carbon rear diffuser (part number 51 62 2 347 848)

M Performance Carbon Rear Diffuser Retrofit Kit.  M Performance Carbon Rear Spoiler Retrofit Kit (Paintable / Non-Paintable) BMW 6 Series Coupé/Gran Coupé (F13/F13M/F06/F06M). M Performance carbon rear diffuser retrofit kit BMW 6 Series Coupé/Gran Coupé/Convertible (F13M/F06M/F12M)

Keep the rivets (1) and screws (2); they will be reused later.

Remove the rivets (1) from underneath. Undo and remove the three screws (2) on the rear diffuser (3). They will be reused later.

The rear diffuser (3) remains secured to the trim (4). Unclip the trim (4) at the upper edge (5) as detailed in ISTA.

M Performance Carbon Rear Diffuser Retrofit Kit.  M Performance Carbon Rear Spoiler Retrofit Kit (Paintable / Non-Paintable) BMW 6 Series Coupé/Gran Coupé (F13/F13M/F06/F06M). M Performance carbon rear diffuser retrofit kit BMW 6 Series Coupé/Gran Coupé/Convertible (F13M/F06M/F12M)

Keep the rivets (1); they will be reused later.

Loosen the rivets (1). Unfasten the four tabs (6) on the rear diffuser (3) from the four springs (7) using suitable tools.

M Performance Carbon Rear Diffuser Retrofit Kit.  M Performance Carbon Rear Spoiler Retrofit Kit (Paintable / Non-Paintable) BMW 6 Series Coupé/Gran Coupé (F13/F13M/F06/F06M). M Performance carbon rear diffuser retrofit kit BMW 6 Series Coupé/Gran Coupé/Convertible (F13M/F06M/F12M)

Place carbon rear diffuser CA with its four tabs (6) on the four springs (7) of the trim (4) and clip it into place. Secure carbon rear diffuser CA on both sides using the existing rivets (1) from underneath. The carbon rear diffuser CA is located under the trim (4).

M Performance Carbon Rear Diffuser Retrofit Kit.  M Performance Carbon Rear Spoiler Retrofit Kit (Paintable / Non-Paintable) BMW 6 Series Coupé/Gran Coupé (F13/F13M/F06/F06M). M Performance carbon rear diffuser retrofit kit BMW 6 Series Coupé/Gran Coupé/Convertible (F13M/F06M/F12M)

Clip the entire trim (4) along the upper edge (5) into the rear apron as described in ISTA. Then press in the rivets (1) on the left and right from underneath and tighten the three screws (2).

9. Concluding work and coding

The retrofit system does not require programming/coding.

– None

banner