Installation kit Automatic antenna BMW 3 Series E21

EBA – 01 29 9 760 547
BMW Installation Instructions


Disconnect battery negative wire.

To prevent damage from drilling chips and to make marking out easier, stick a piece of crepe adhesive tape over place where hole is to be drilled.

Dimension x = 149 mm Dimension y = 16 mm
Installation kit Automatic antenna BMW 3 Series E21

Centre-punch intersection and drill a 22 mm hole.

Remove adhesive tape, deburr hole and paint edges with zinc paint. Remove drilling chips.

Installation kit Automatic antenna BMW 3 Series E21

Attach bracket and dished washer loosely to aerial with hexscrew.

Installation kit Automatic antenna BMW 3 Series E21

Install automatic aerial.

Note fitting sequence:

  1. Automatic aerial
  2. Shell
  3. Shell
  4. Brass ring
  5. Sealing ring
  6. Fender
  7. Packing
  8. Upper ring
  9. Shell
  10. Shell
  11. Nut

Installation kit Automatic antenna BMW 3 Series E21

Secure bracket to metal web with earth wire (1).

When doing this, fix position of aerial.

Installation kit Automatic antenna BMW 3 Series E21

Connect aerial wire and connector to aerial.

Installation kit Automatic antenna BMW 3 Series E21

Lift protective caps off, remove screws and take seat bench out.

Installation kit Automatic antenna BMW 3 Series E21

Loosen both screws, unhook backrest by pushing it upwards and take it out.

Installation kit Automatic antenna BMW 3 Series E21

Remove trim from belt retractor.

Installation kit Automatic antenna BMW 3 Series E21

Remove trim under instrument panel.

Installation kit Automatic antenna BMW 3 Series E21

Lift sill panel trim off.

Push carpet back.

Run wire from aerial to front of the instrument panel along the existing loom and secure it.

Installation kit Automatic antenna BMW 3 Series E21

Attach white wire (1) to connection “Automatic aerial” and aerial wire (2) to radio. Insulate free end (3) of wire.

Installation kit Automatic antenna BMW 3 Series E21

Connect red wire (1) under instrument panel to a wire which always carries current (terminal 30).

Installation kit Automatic antenna BMW 3 Series E21

Caution!

Check that there is sufficient clearance between boot lid and aerial.

Installation kit Automatic antenna BMW 3 Series E21

banner