X
    Categories: Reading lamp

Reading lamp BMW 5 Series E34 and BMW 7 Series E32

EBA – 01 29 9 783 023
BMW Installation Instructions

Installation is illustrated on the right side of the car.

The reading lamp is installed on the left side of the car in the same way, mirror-image fashion.

No tools are required.

Remove C-post trim

F 32 63 014

Pull protective edging (1) off C-post (2) as shown by the arrows.

F 32 63 015

Pull C-post trim up and off retaining pins (2, 3).

Pull C-post trim out of its retaining clips as shown by the arrow.

Break the plug connection (4) for the interior light (5).

F 32 63 016

Pull plug (1) from C-post trim (2) as shown by the arrow. Remove interior light (3) from C-post trim (2).

F 32 63 017

Open flap (1) on reading lamp (2) as shown by the arrow.

F 32 63 018

Insert bulb (1) and close flap (2).

Insert bulb (3).

Cars prior to 7/89

F 32 63 019

Press reading lamp (1) into trim (2) of C-post (3). Push plug (4) into the guide provided in the post trim (6). Plug together connections (4, 5).

Cars from 7/89

F 32 63 044

Press reading lamp (1) into C-post trim (2). Push plug (3) into the guide provided and join it to plug (4). Plug together connections (5, 6).

Install trim

F 32 63 020

Locate trim (1) so that both clips (2, 3) engage in the C-post (4). Slide trim as far to the rear as possible (arrow).

F 32 63 021

Press trim (1) onto the C-post so that pins (2, 3) click into place.

F 32 63 022

Press on protective edging (1).

Note

The protective edging has two grooves. Attach the outer groove (2) to the car’s bodywork (3) and the inner groove (4) to the trim (5).

Carry out a functional test.

Printing and other errors, omissions and amendments excepted.

eba :
Disqus Comments Loading...

This website uses cookies.