Vehicle inclination alarm sensor BMW 5 series E34, BMW 7 series E32

EBA – 01 29 9 784 938
BMW Installation Instructions

Tools and Equipment Required

Phillips screwdriver
Normal screwdriver
3/8 inch reversible ratchet
3/8 inch extension
3/8 inch socket wrench insert, waf 10mm, 13mm, 17mm
Drill
Spiral drill, dia. 5mm
Water-soluble crayon
Priming stick
Hammer
Punch
Electric torch

Preparatory work

  1. Print out error memory.
  2. Disconnect vehicle battery/batteries.
  3. Remove rear bench seat or left hand bucket seat.

F 34 62 136

Vehicle inclination alarm sensor BMW 5 series E34, BMW 7 series E32

Fold back carpet (1) as shown in drawing and secure alarm sensor (2) upright at suitable location in left rear seat box.

F 32 82 003

Vehicle inclination alarm sensor BMW 5 series E34, BMW 7 series E32

Insert connection cable (1) of same colour as cable in receptacle (2) of alarm cable harness using cable connector (3). Connect up cable connector (3) and receptacle (2).

Function description of vehicle inclination alarm sensor

Whenever the alarm system is activated, the inclination alarm sensor is switched on, storing the vehicle inclination at that time in memory.

As soon as the inclination of the vehicle alters for more than 3 degrees for longer than 3 seconds, a signal triggers an alarm in the alarm system. Thereafter, the new inclination of the vehicle is stored and the monitoring process starts over again.

banner