Retrofit kit for boot space partition net BMW 5 Series touring (E39/2)

EBA – 01 29 9 790 679
BMW Installation Instructions

Retrofit kit for boot space partition net BMW 5 Series touring (E39/2)

Technical knowledge is required.

Installation time approx. 1 hour, which can vary according to the condition and fittings of the vehicle. These installation instructions are to be handed over to the customer.

Note on safety

Installation of the boot-space partition net is to be carried out exclusively by a BMW specialist workshop.

It is only there that appropriately trained specialist staff are available with the necessary tools and auxiliary materials.

BMW accepts no liability for damage which occurs as a result of not following the work sequence and safety instructions. In addition, any warranty claim against BMW AG is extinguished in the event of improper

fitting and handling which diverges from the fitting and operating instructions.

Mounting note

The working steps on the roof liner are illustrated on the left side of the vehicle. Work on the roof liner on the right-hand side of the vehicle is to be carried out as a mirror image.

Required tools and auxiliary materials

Phillips screwdriver
Water-soluble marker
Blade knife
Scissors
Adhesive tape

Contents

Section

Necessary preparatory work
Fit suspension hooks
Mount boot-space partition net in front of the rear seat bench

Parts kit

F 39 51 020 ZS

Retrofit kit for boot space partition net BMW 5 Series touring (E39/2)

1 Raised cheese head screw M6x16 (2x)
2 Raised cheese head screw M6x25 (2x)
3 Suspension hook (2x)
4 Suspension hook (2x)
5 Template (1x)
6 Template (1x)
7 Parts and Accessories – Installation Instructions (1x)

Necessary preparatory work

Separate out templates from these installation instructions and trim them appropriately.

Dismantle removable interior boot lid.

F 39 51 021 ZS

Retrofit kit for boot space partition net BMW 5 Series touring (E39/2)

Press release buttons (arrows) and remove interior boot lid from the vehicle.

Fit suspension hooks

F 39 51 022 ZS

Retrofit kit for boot space partition net BMW 5 Series touring (E39/2)

Fit template (A) on the left-hand side of the vehicle between B-pillar (1) and grab handle (2) inserting it as far as the stop under the strip seal (3). Set template (A) exactly against grab handle (2) (see arrows) and stick it to the roof liner (5) with adhesive tape (4).

Mark the aperture (6) on the roof liner (5) and cut it out.

Note

Start cutting from the centre outwards and keep to the contour of the suspension hook.

F 39 51 023 ZS

Retrofit kit for boot space partition net BMW 5 Series touring (E39/2)

Insert suspension hook (1) in the recess and secure it with raised cheese head screw M6x25mm (2).

Position template (A) on the right-hand side of the vehicle exactly in mirror image and repeat work steps.

F 39 51 024 ZS

Retrofit kit for boot space partition net BMW 5 Series touring (E39/2)

Prise out left C-pillar trim panel (1) in direction of arrow and remove from C-pillar.

Note

There is no need to disassemble the seat belt.

F 39 51 025 ZS

Retrofit kit for boot space partition net BMW 5 Series touring (E39/2)

Slide template (B) into the strip seal (1) until the stop and position it against the C-pillar (2). Stick template (B) to the roof liner (4) with adhesive tape (3). Mark aperture (5) on the roof liner (4) and cut it out.

Note

Start cutting from the centre outwards and keep to the contour of the suspension hook.

Position template (B) on the right-hand side of the vehicle exactly in mirror image and repeat work steps.

F 39 51 026 ZS

Retrofit kit for boot space partition net BMW 5 Series touring (E39/2)

Insert suspension hook (1) in the recess on the roof liner (2) and secure it with raised cheese head screw M6x16mm (3).

Reassemble C-pillar trim panels on left and right.

F 39 51 021 ZS

Retrofit kit for boot space partition net BMW 5 Series touring (E39/2)

Mounting of the boot-space partition net behind the rear-seat backs is done in the same way as for the interior boot lid.

Draw out boot-space partition net and hitch on to the two suspension hooks.

Mount boot-space partition net in front of the rear seat bench

F 39 51 027 ZS

Retrofit kit for boot space partition net BMW 5 Series touring (E39/2)

Insert boot-space partition net (1) in the two supports (2) in direction of arrow and slide across at a right angle to the vehicle’s longitudinal axis (arrow) until the boot-space partition net audibly engages.

Draw out boot-space partition net and hitch into the two suspension hooks.

banner